ファームウェア 1.11 でハックキット：動作確認
Debian
LS-QL
ファームウェア 1.11 には相変わらずセキュリティホールが空いている。
自分を守るために、ハックキットをインストールする。
続いて
動作確認
いつもなら、
最初の設定（以降）を先に実行するのだが、
こちらを先にした方が良さそう。
LED の確認
問題なし
USB メモリの認識
フロントパネルの USB ポートに刺す。
qube:~# tail -f /var/log/messages
:
:
usb 1-1: new full speed USB device using ehci_marvell and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
May 5 06:39:15 qube kernel: usb 1-1: new full speed USB device using ehci_marvell and address 2
May 5 06:39:15 qube kernel: usb 1-1: configuration #1 chosen from 1 choice
May 5 06:39:15 qube kernel: scsi2 : SCSI emulation for USB Mass Storage devices
scsi 2:0:0:0: Direct-Access eUSB Memory Stick 5.06 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb] 126912 512-byte hardware sectors (65 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 126912 512-byte hardware sectors (65 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb:May 5 06:39:21 qube kernel: scsi 2:0:0:0: Direct-Access eUSB Memory Stick 5.06 PQ: 0 ANSI: 2
May 5 06:39:22 qube kernel: sd 2:0:0:0: [sdb] 126912 512-byte hardware sectors (65 MB)
May 5 06:39:22 qube kernel: sd 2:0:0:0: [sdb] Write Protect is off
May 5 06:39:22 qube kernel: sd 2:0:0:0: [sdb] 126912 512-byte hardware sectors (65 MB)
May 5 06:39:22 qube kernel: sd 2:0:0:0: [sdb] Write Protect is off
sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
May 5 06:39:22 qube kernel: sdb: sdb1
May 5 06:39:22 qube kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
May 5 06:39:22 qube kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0
なんで、こどもの日？
抜く
usb 1-1: USB disconnect, address 2
May 5 06:40:34 qube kernel: usb 1-1: USB disconnect, address 2
リアパネルの USB ポートに刺す
usb 2-1: new full speed USB device using ehci_marvell and address 2
usb 2-1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
May 5 06:41:31 qube kernel: usb 2-1: new full speed USB device using ehci_marvell and address 2
May 5 06:41:31 qube kernel: usb 2-1: configuration #1 chosen from 1 choice
May 5 06:41:31 qube kernel: scsi3 : SCSI emulation for USB Mass Storage devices
scsi 3:0:0:0: Direct-Access eUSB Memory Stick 5.06 PQ: 0 ANSI: 2
sd 3:0:0:0: [sdb] 126912 512-byte hardware sectors (65 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] 126912 512-byte hardware sectors (65 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg1 type 0
May 5 06:41:37 qube kernel: scsi 3:0:0:0: Direct-Access eUSB Memory Stick 5.06 PQ: 0 ANSI: 2
May 5 06:41:37 qube kernel: sd 3:0:0:0: [sdb] 126912 512-byte hardware sectors (65 MB)
May 5 06:41:37 qube kernel: sd 3:0:0:0: [sdb] Write Protect is off
May 5 06:41:37 qube kernel: sd 3:0:0:0: [sdb] 126912 512-byte hardware sectors (65 MB)
May 5 06:41:38 qube kernel: sd 3:0:0:0: [sdb] Write Protect is off
May 5 06:41:38 qube kernel: sdb: sdb1
May 5 06:41:38 qube kernel: sd 3:0:0:0: [sdb] Attached SCSI removable disk
May 5 06:41:38 qube kernel: sd 3:0:0:0: Attached scsi generic sg1 type 0
認識できている。
プリンタの認識（LS-GL 以外）
もう、フロントパネルのポートに刺すだけでもいいかな。
usb 1-1: new full speed USB device using ehci_marvell and address 3
usb 1-1: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
May 5 06:42:52 qube kernel: usb 1-1: new full speed USB device using ehci_marvell and address 3
May 5 06:42:52 qube kernel: usb 1-1: configuration #1 chosen from 1 choice
May 5 06:42:52 qube kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
リブートの確認
qube:~#
qube:~# shutdown -r now
INIT: Sending processes the TERM signal
Stopping internet superserver: inetd.
Saving the system clock.
Stopping enhanced syslogd: rsyslogd.
Asking all remaining processes to terminate...done.
:
無事リブートしてきた。
シャットダウンの確認
電源ボタンを長押し
Debian GNU/Linux 5.0 qube ttyS0
INIT: Sending pStopping internet superserver: inetd.
Saving the system clock.
Stopping enhanced syslogd: rsyslogd.
Asking all remaining processes to terminate...done.
:
無事シャットダウンされた。
Copyright (C) 2003-2009 Yasunari Yamashita. All Rights Reserved.
yasunari ＠ yamasita.jp 山下康成＠京都府向日市
