HDD はどうなった？

HDD がどうなってしまったか見てみる。

LS-QL に USB で接続

root@qube:~# tail -f /var/log/messages
	:
	:
Oct  8 20:50:46 qube kernel: usb 2-1: new high speed USB device using ehci_marvell and address 2
Oct  8 20:50:46 qube kernel: usb 2-1: configuration #1 chosen from 1 choice
Oct  8 20:50:46 qube kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Oct  8 20:50:51 qube kernel: scsi 2:0:0:0: Direct-Access     ViPowER  VP-89118(SD1)    2.10 PQ: 0 ANSI: 4
Oct  8 20:50:51 qube kernel: sd 2:0:0:0: [sdd] 625000320 512-byte hardware sectors (320000 MB)
Oct  8 20:50:51 qube kernel: sd 2:0:0:0: [sdd] Write Protect is off
Oct  8 20:50:51 qube kernel: sd 2:0:0:0: [sdd] 625000320 512-byte hardware sectors (320000 MB)
Oct  8 20:50:51 qube kernel: sd 2:0:0:0: [sdd] Write Protect is off
Oct  8 20:50:51 qube kernel: sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6
Oct  8 20:50:51 qube kernel: sd 2:0:0:0: [sdd] Attached SCSI disk
Oct  8 20:50:51 qube kernel: sd 2:0:0:0: Attached scsi generic sg3 type 0

/

root@qube:~# mount /dev/sdd2 /tmp/root
root@qube:~# ls /tmp/root
mnt  tmp
root@qube:~# ls /tmp/root/mnt
ram
root@qube:~# ls /tmp/root/tmp
ldconfig  lighttpd  utmp
root@qube:~#

/boot

root@qube:~# mkdir /tmp/boot
root@qube:~# mount /dev/sdd1 /tmp/boot
root@qube:~# ls /tmp/boot
conf_save.tgz                   initrd.buffalo       u-boot.buffalo  uImage.buffalo.orig
hddrootfs.buffalo.updated.done  initrd.buffalo.orig  uImage.buffalo
root@qube:~#

/mnt

root@qube:~# mkdir /tmp/mnt
root@qube:~# mount /dev/sdd6 /tmp/mnt
mount: wrong fs type, bad option, bad superblock on /dev/sdd6,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

root@qube:~# mount -t xfs /dev/sdd6 /tmp/mnt
mount: wrong fs type, bad option, bad superblock on /dev/sdd6,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

root@qube:~#

ブッチンしたからか？？

復旧

LS410D 楽天市場 Amazon