|
Debian 7.0 (wheezy) がリリースされたので、 冬眠から覚める（謎
まずはいろいろ最新にしていく。
root@LS-VL815:~# cat /etc/linkstation_release VERSION=1.63 SUBVERSION=HDD 3.22 PRODUCTID=0x00000000 BUILDDATE=2012/10/19 13:36:30 root@LS-VL815:~#1.63 だったので、1.64 にアップデートする。
略
アップデートしてから気がついたが、、、
標準ファーム 1.64 はインストールしなかったほうが良かったみたい
最近、物忘れが激しくていかん。。。
やってしまったので、このまま進む。
それにしても未だに放置されているとは、、、
Buffalo さん、全くやる気ないな。
root@qube:~# mkdir /tmp/root mkdir: cannot create directory `/tmp/root': File exists root@qube:~# mount /dev/sdd2 /tmp/root root@qube:~#
root@qube:~# cd /tmp/root/etc/ root@qube:/tmp/root/etc# grep root shadow root::15835:0:99999:7::: root@qube:/tmp/root/etc#
!root@qube:/tmp/root/etc# patch < ~/sshd_config.diff patching file sshd_config root@qube:/tmp/root/etc#
root@qube:/tmp/root/etc# cd / root@qube:/# umount /tmp/root root@qube:/#
Last login: Sat May 11 08:54:20 2013 from shinjuw.yamasita.jp root@LS-VL815:~#
root@LS-VL815:~# cat /proc/cpuinfo Processor : Feroceon 88FR131 rev 1 (v5l) BogoMIPS : 1594.16 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Feroceon-KW Revision : 0000 Serial : 0000000000000000 root@LS-VL815:~#
root@LS-VL815:~# cat /proc/meminfo MemTotal: 248532 kB MemFree: 52172 kB Buffers: 9940 kB Cached: 95452 kB SwapCached: 0 kB Active: 96976 kB Inactive: 73400 kB Active(anon): 69452 kB Inactive(anon): 240 kB Active(file): 27524 kB Inactive(file): 73160 kB Unevictable: 11568 kB Mlocked: 11568 kB SwapTotal: 999992 kB SwapFree: 999992 kB Dirty: 20 kB Writeback: 0 kB AnonPages: 76568 kB Mapped: 18436 kB Shmem: 2044 kB Slab: 9932 kB SReclaimable: 4036 kB SUnreclaim: 5896 kB KernelStack: 912 kB PageTables: 900 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1124256 kB Committed_AS: 240744 kB VmallocTotal: 761856 kB VmallocUsed: 23144 kB VmallocChunk: 514388 kB root@LS-VL815:~#せめて 512MB あったらなぁ、、、
root@LS-VL815:~# uname -a Linux LS-VL815 3.3.4-88f6281 #2 Mon Dec 10 17:31:41 JST 2012 armv5tel unknown root@LS-VL815:~#
root@LS-VL815:~# dmesg
Booting Linux on physical CPU 0
Initializing cgroup subsys cpu
Linux version 3.3.4-88f6281 (root@build2.dd-hot24.nas.buffalo.local) (gcc version 4.2.0 20070413 (prerelease)) #2 Mon Dec 10 17:31:41 JST 2012
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
paging_init: zero_page=0xcfffc000
arm_bootmem_init: boot_pages=0x2 bitmap=0xfffa000
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c051ec1c, node_mem_map c1401000
Normal zone: 512 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 65024 pages, LIFO batch:15
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 65024
Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,12M panic=5 BOOTVER=0.26
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 236096k/236096k available, 26048k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc04ce000 (4888 kB)
.init : 0xc04ce000 - 0xc04f3000 ( 148 kB)
.data : 0xc04f4000 - 0xc0520620 ( 178 kB)
.bss : 0xc0520620 - 0xc0532428 ( 72 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:128
Console: colour dummy device 80x30
Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x17568 - 0x175a4
: consistent_pte=0xc8000b80
xor: measuring software checksum speed
arm4regs : 1453.600 MB/sec
8regs : 1102.400 MB/sec
32regs : 1236.800 MB/sec
xor: using function: arm4regs (1453.600 MB/sec)
NET: Registered protocol family 16
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 256MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB
PEX0_IO ....base f2000000, size 1MB
PEX1_MEM ....base e8000000, size 128MB
PEX1_IO ....base f2100000, size 1MB
INTER_REGS ....base f1000000, size 1MB
NFLASH_CS ....base fa000000, size 2MB
SPI_CS ....base f4000000, size 16MB
BOOT_ROM_CS ....no such
DEV_BOOTCS ....no such
CRYPT_ENG ....base f0000000, size 2MB
Marvell Development Board (LSP Version KW_LSP_5.1.3_patch13)-- MVLSV Soc: 88F6282 A0 LE
Detected Tclk 200000000 and SysClk 533333333
gpiochip_add: registered GPIOs 0 to 63 on device: mv_gpio
MV Buttons Device Load
Marvell USB EHCI Host controller #0: c8047000
PEX0 interface detected no Link.
PEX1 interface detected no Link.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
PCI: bus0: Fast back to back transfers enabled
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:01: root bus resource [mem 0x00000000-0xffffffff]
PCI: bus1: Fast back to back transfers enabled
bio: create slab <bio-0> at 0
raid6: int32x1 146 MB/s
raid6: int32x2 175 MB/s
raid6: int32x4 171 MB/s
raid6: int32x8 156 MB/s
raid6: using algorithm int32x2 (175 MB/s)
vgaarb: loaded
SCSI subsystem initialized
Switching to clocksource kw_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 32
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12288K
XOR registered 4 channels
XOR 2nd invalidate WA enabled
cesadev_init(c04d6134)
MV Buttons Driver Load
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.1.00 installed.
Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
initial_polarity_val = 0x00030000
initial_polarity_val_high = 0x0001f100
Buffalo GPIO SATA Hotplug Event Driver (C) BUFFALO INC. Ver.1.00 installed.
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) 息 2001-2006 Red Hat, Inc.
fuse init (API version 7.18)
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 485
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
brd: module loaded
loop: module loaded
Integrated Sata device found
mvSataInitAdapter : regVal changed(0x00000010)
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
** BUFFALO Disable Command Queuing Function [0 0] **
scsi 0:0:0:0: Direct-Access SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
sd 0:0:0:0: [sda] 488283264 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] 0-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
SPI Serial flash detected @ 0xf4000000, 512KB (8sec x 64KB)
NAND init: NAND device not found on board
Loading Marvell Ethernet Driver:
o Cached descriptors in DRAM
o DRAM SW cache-coherency
o 2 Giga ports supported
o Single RX Queue support - ETH_DEF_RXQ=0
o Single TX Queue support - ETH_DEF_TXQ=0
o TCP segmentation offload (TSO) supported
o Receive checksum offload supported
o Transmit checksum offload supported
o Driver ERROR statistics enabled
o Proc tool API enabled
o Gateway support enabled
o Using Marvell Header Mode
o L2 IGMP support
o Rx descripors: q0=128
o Tx descripors: q0=532
o Loading network interface(s):
o register under mv88fx_eth platform
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
o eth0, ifindex = 2, GbE port = 0
Warning: Giga 1 is Powered Off
Warning: Giga 1 is Powered Off
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
rtc-mv rtc-mv: setting system clock to 2013-05-11 11:54:30 UTC (1368273270)
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
sd 0:0:0:0: [sda] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: gzip image found at block 0
VFS: Mounted root (ext2 filesystem) on device 1:0.
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
umount: sending ioctl 4c01 to a partition!
umount: sending ioctl 4c01 to a partition!
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
umount: sending ioctl 4c01 to a partition!
umount: sending ioctl 4c01 to a partition!
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 8:2.
Trying to move old root to /initrd ... okay
Freeing init memory: 148K
udevd (725): /proc/725/oom_adj is deprecated, please use /proc/725/oom_score_adj instead.
Adding 999992k swap on /dev/sda5. Priority:-1 extents:1 across:999992k
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usblp
eth0: link down
eth0: started
eth0: link up, full duplex, speed 1 Gbps
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
XFS (sda6): Mounting Filesystem
XFS (sda6): Ending clean mount
bfSetMagicKey > Changed to 0x71 from 0x5c
root@LS-VL815:~#
root@LS-VL815:~# cat /etc/linkstation_release VERSION=1.64 SUBVERSION=HDD 3.29 PRODUCTID=0x00000000 BUILDDATE=2012/12/12 10:13:38 root@LS-VL815:~# cat /proc/buffalo/firmware SERIES=LinkStation PRODUCTNAME=LS-VL(JOMEI) VERSION=0.16 SUBVERSION=FLASH 0.00 PRODUCTID=0x00000016 BUILDDATE=2012/11/12 14:37:28 BOOTVER=0.26 root@LS-VL815:~#
root@LS-VL815:~# ps
PID Uid VSZ Stat Command
1 root 3140 S init
2 root SW [kthreadd]
3 root SW [ksoftirqd/0]
4 root RW [kworker/0:0]
5 root SW [kworker/u:0]
6 root SW< [khelper]
7 root SW [kworker/u:1]
98 root SW [sync_supers]
100 root SW [bdi-default]
102 root SW< [kblockd]
110 root SW< [md]
206 root SW [kswapd0]
255 root SW [fsnotify_mark]
273 root SW< [xfs_mru_cache]
274 root SW< [xfslogd]
275 root SW< [xfsdatad]
276 root SW< [xfsconvertd]
277 root SW< [crypto]
304 root SW [crypto]
305 root SW [crypto_ret]
491 root SW [scsi_eh_0]
492 root SW [scsi_eh_1]
514 root SW [mtdblock0]
526 root SW< [kcryptd]
606 root SW [flush-8:0]
684 root SW [kjournald]
725 root 1776 S < /sbin/udevd --daemon
1555 root SW [kjournald]
1610 root SW [khubd]
1678 root 1676 S /sbin/dhcpcd -L /etc/dhcpc -h LS-VL815 -t 15 -x -y -z
1735 root 1912 S syslogd -m 0
1737 root 2784 S klogd
1746 root 3676 S /usr/sbin/inetd
1750 root 1880 S /usr/local/sbin/errormon
1755 root 2260 S /bin/sh /usr/local/sbin/kernelmon
1764 root 27244 S /usr/bin/python /usr/local/sbin/BuffaloXMLRPCServer.p
1791 root 2716 S /bin/sh /usr/local/sbin/miconmon_exec.sh start
1859 root SW [xfsbufd/sda6]
1860 root SW [xfsaild/sda6]
1976 root 1860 S /usr/local/sbin/logchkd
2007 root 2840 S /bin/bash /usr/local/sbin/diskmon_exec.sh start
2033 root 4408 S /usr/sbin/lighttpd.webui -f /etc/lighttpd/buffalo-web
2043 root 4408 S /usr/sbin/lighttpd.webui -f /etc/lighttpd/buffalo-web
2059 root 13648 S /usr/local/sbin/smbd -D
2061 root 7344 S /usr/local/sbin/nmbd -D
2073 root 13648 S /usr/local/sbin/smbd -D
2082 root 2208 S /usr/local/sbin/clientUtil_server -i eth0
2094 root 1796 S /usr/local/sbin/mDNSResponderPosix -b -f /etc/bonjour
2097 root 4180 S /usr/local/sbin/lsprcvd -i eth0
2100 root 1852 S /usr/local/sbin/daemonwatch -a /etc/daemonwatch.list
2107 root 3416 S /usr/sbin/crond
2169 root 2544 S lpd Waiting
2183 root 9948 S /usr/local/BootServer/rarpcfgd
2184 root 1624 S /usr/local/BootServer/fwupdated
2188 root 1756 S /usr/local/BootServer/tftpd
2189 root 18148 S /usr/local/BootServer/rarpd
2457 root 3276 S /usr/local/sbin/mt-daapd -c /etc/mt-daapd.conf
2458 root 11464 S /usr/local/sbin/mt-daapd -c /etc/mt-daapd.conf
2537 root 2756 S /usr/local/twonky-alt/atomheartmother -utf8 -exedir /
2538 root 3200 S /usr/local/twonky-alt/initdx -utf8 -exedir /usr/local
2554 root 12720 S /usr/local/twonky-alt/initdx -utf8 -exedir /usr/local
2625 root Z [initdx]
2903 root 3284 S cat /proc/buffalo/kernevnt
2962 squeezeboxs 53692 S /usr/local/squeezebox/perl-5.10.0/bin/perl /usr/lo
2983 squeezeboxs 97916 S /usr/sbin/mysqld --defaults-file=/mnt/disk1/spool/
2996 root SW [kworker/0:2]
3006 root 4088 S /usr/local/sbin/sshd
3111 root 3420 S /sbin/getty -L ttyS0 115200 vt100
3697 root 7032 S sshd: root@pts/0
3717 root 2392 S -sh
8959 root 3284 S sleep 10
8987 root Z [grep]
8989 root 3284 S sleep 3
8991 root 3420 R ps
root@LS-VL815:~#
root@LS-VL815:~# cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] unused devices: <none> root@LS-VL815:~#
root@LS-VL815:~# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/sda2 4923420 912000 3761324 20% / udev 10240 88 10152 1% /dev /dev/ram1 15360 152 15208 1% /mnt/ram /dev/sda1 992036 33308 908732 4% /boot /dev/disk1_6 237023872 610784 236413088 0% /mnt/disk1 tmpfs 8192 1800 6392 22% /mnt/ram/com.kernel.org root@LS-VL815:~# mount rootfs on / type rootfs (rw) /dev/root on / type ext3 (rw,relatime,errors=continue,barrier=0,data=writeback) proc on /proc type proc (rw,relatime) sysfs on /sys type sysfs (rw,relatime) udev on /dev type tmpfs (rw,nosuid,relatime,size=10240k,mode=755) devpts on /dev/pts type devpts (rw,relatime,gid=4,mode=620) /dev/ram1 on /mnt/ram type tmpfs (rw,relatime,size=15360k) /dev/sda1 on /boot type ext3 (rw,relatime,errors=continue,barrier=1,data=writeback) usbfs on /proc/bus/usb type usbfs (rw,relatime) /dev/disk1_6 on /mnt/disk1 type xfs (rw,noatime,attr2,usrquota,grpquota) tmpfs on /mnt/ram/com.kernel.org type tmpfs (rw,relatime,size=8192k) root@LS-VL815:~#
|
|
← SquashFS filesystem のサポート |
ハックの記録 LinkStation／玄箱 をハックしよう |
→ ファームウェア 1.64 でハックキットのインストール |
Copyright (C) 2003-2013 Yasunari Yamashita. All Rights Reserved.
yasunari ＠ yamasita.jp 山下康成＠京都府向日市
