ファームウェア 1.09 βでハックキットのインストール

ファームウェア 1.00 βでハックキットのインストールの確認する。

HDD の初期化

まずは、インストールする HDD を準備する。
実験用 HDD の DiamondMAX を玄箱/Pro の SATA2 ポートに接続

Debian GNU/Linux 4.0
kup login: yasunari
Password:
Last login: Sat May  9 23:36:52 2009 from uxl.yamasita.jp on pts/0
Linux kup 2.6.12.6-arm1 #27 Tue Apr 10 22:47:16 JST 2007 armv5tejl

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
yasunari@kup:~$ su - root
Password:
kup:~# fdisk /dev/sdb

The number of cylinders for this disk is set to 19929.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/sdb: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         125     1004031   83  Linux
/dev/sdb2             126         748     5004247+  83  Linux
/dev/sdb4             749       19929   154071382+   5  Extended
/dev/sdb5             749         873     1004031   82  Linux swap / Solaris
/dev/sdb6             874       19354   148448601   83  Linux

Command (m for help): d
Partition number (1-6): 4

Command (m for help): d
Partition number (1-4): 2

Command (m for help): d
Selected partition 1

Command (m for help): p

Disk /dev/sdb: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
kup:~#

準備（LS-QL の場合）

以下、準備（LS-QL の場合）に準じてインストールする。

標準ファームに root でログインできるようにする

標準ファームの HDD のコピー

(1) ドライブ１に標準ファームの HDD をセット、ドライブ２に上記パーティションを削除した HDD をセットして起動。
(2) 標準ファームの Web 管理画面を用い DISK2 を XFS でフォーマット。
(3) 電源 OFF。コンセントも抜く。

標準ファームで起動

ドライブ１の HDD を抜き、ドライブ２の HDD をドライブ１にセットし、起動。

ハックキットのファイルを置きます

RamBoot モードへの変更

(1) telnet して標準ファームに root でログインします。

BUFFALO INC. LinkStation series
LS-QL233 login: root
No mail.
root@LS-QL233:~#

(2) initrd.buffalo の変更
ramroot_090225.sh を実行する。

root@LS-QL233:~# cd /mnt/disk1/share/hackkit/
root@LS-QL233:/mnt/disk1/share/hackkit# ls
hackkit_090226.tar.gz  mkimage                setup_090203.sh
hackkit_090227.sh      ramroot_090225.sh
hackkit_config.sample  rsync_090225.sh
root@LS-QL233:/mnt/disk1/share/hackkit# sh ramroot_090225.sh
Extracting initrd...
110175+1 records in
110175+1 records out
mounting initrd...
editing linuxrc...
clearing root's password...
rebuilding initrd.buffalo...
gziping initrd ... wait 5 minutes
Image Name:   initrd
Created:      Sun May 10 13:37:21 2009
Image Type:   ARM Linux RAMDisk Image (gzip compressed)
Data Size:    7019695 Bytes = 6855.17 kB = 6.69 MB
Load Address: 0x00000000
Entry Point:  0x00000000
root@LS-QL233:/mnt/disk1/share/hackkit#

(3) 電源 OFF。コンセントも抜きます。
(4) コンセントを刺し、電源 ON。RamRoot モードで起動してきます。

時計を合わせる

時計を合わせる。

root@LS-QL-EM233:~# date
Sun May 10 13:40:35 JST 2009
root@LS-QL-EM233:~#

あってる。

ディスクのマウント

ハックキットを納めている HDD をマウントします。

root@LS-QL-EM233:~# mkdir /mnt/disk1
mkdir: cannot create directory '/mnt/disk1': File exists
root@LS-QL-EM233:~# mount /dev/sda6 /mnt/disk1
XFS mounting filesystem sda6
XFS resetting qflags for filesystem sda6
root@LS-QL-EM233:~#

:
:
---- in hackkit linuxrc ---
grep: /var/tmp/devlink: No such file or directory
-- rebuild mdadm.conf for BOOT, ROOTFS --
mdadm: cannot open /dev/disk2_1: No such device or address
mdadm: cannot open /dev/disk2_2: No such device or address
mdadm: cannot open /dev/disk2_5: No such device or address
md: md10 stopped.
mdadm: cannot open device /dev/disk2_1: No such device or address
mdadm: /dev/disk2_1 has wrong uuid.
mdadm: /dev/disk1_1 has wrong uuid.
mdadm: cannot open device /dev/disk2_2: No such device or address
mdadm: /dev/disk2_2 has wrong uuid.
mdadm: /dev/disk1_2 has wrong uuid.
mdadm: cannot open device /dev/disk2_5: No such device or address
mdadm: /dev/dmd: bind<sda5>
isk2_5 has wrong uuid.
raid1: raid set md10 active with 1 out of 4 mirrors
mdadm: /dev/md10md: md1 stopped.
has been started with 1 drive (out of 4).
mdadm: /dev/disk1_1 has wrong uuid.
md: bind<sda2>
raid1: raid set md1 active with 1 out of 4 mirrors
mdadm: /dev/md1 md: md0 stopped.
has been started with 1 drive (out of 4).
md: bind<sda1>
raid1: raid set md0 active with 1 out of 4 mirrors
mdadm: /dev/md0 has been started with 1 drive (out of 4).
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to -1
/sys/block/md1/md/maxerr_cnt is setted to -1
/sys/block/md10/md/maxerr_cnt is setted to -1
umount: cannot open /proc/mounts
Filesystem "md1": Disabling barriers, not supported by the underlying device
XFS mounting filesystem md1
VFS: Mounted root (xfs filesystem).
Trying to move old root to /initrd ... okay
Freeing init memory: 120K
INIT: version 2.86 booting
Setting the system clock.
Activating swap...Adding 1003896k swap on /dev/md10. Priority:-1 extents:1 across:1003896k
done.
Filesystem "md1": Disabling barriers, not supported by the underlying device
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
XFS mounting filesystem sda6
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...eth reg(9) val=0x0300
eth0: link down
done.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_marvell ehci_marvell.4523: Marvell Orion EHCI
ehci_marvell ehci_marvell.4523: new USB bus registered, assigned bus number 1
eth0: link up, full duplex, speed 1 Gbps
ehci_marvell ehci_marvell.4523: irq 17, io base 0xf1050100
ehci_marvell ehci_marvell.4523: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_marvell ehci_marvell.167817: Marvell Orion EHCI
ehci_marvell ehci_marvell.167817: new USB bus registered, assigned bus number 2
ehci_marvell ehci_marvell.167817: irq 12, io base 0xf10a0100
ehci_marvell ehci_marvell.167817: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Starting internet superserver: inetd.
Starting periodic command scheduler: crond.

Debian GNU/Linux 5.0 qube ttyS0

qube login:

最初の設定

Debian GNU/Linux 5.0 qube ttyS0

qube login: guest
Password:
Linux qube 2.6.22.7 #382 Fri Apr 24 18:43:38 JST 2009 armv5tejl

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
No directory, logging in with HOME=/
guest@qube:/$

root になる

guest@qube:/$ su - root
Password:
qube:~#

時計を合わせる

qube:~# date
Sun May 10 13:50:39 JST 2009
qube:~#

あっている。ここから先は、スクリプトに任せる。

qube:~# cd /mnt/disk1/share/hackkit/
qube:/mnt/disk1/share/hackkit# ls
hackkit_090226.tar.gz  hackkit_config  ramroot_090225.sh  setup_090203.sh
hackkit_090227.sh      mkimage         rsync_090225.sh
qube:/mnt/disk1/share/hackkit# sh setup_090203.sh
passwd root
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
Adding group `yamasita' (GID 1001) ...
Done.
adduser yasunari
Adding user `yasunari' ...
Adding new user `yasunari' (1001) with group `yamasita' ...
Creating home directory `/home/yamasita/yasunari' ...
Copying files from `/etc/skel' ...
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
Removing user `guest' ...
Warning: group `guest' has no more members.
userdel: user guest is currently logged in
/usr/sbin/deluser: `/usr/sbin/userdel guest' returned error code 8. Exiting.
Get:1 http://ftp.jp.debian.org lenny Release.gpg [394B]
Get:2 http://ftp.jp.debian.org lenny Release [73.6kB]
	:
	:
Get:7 http://security.debian.org lenny/updates/main Packages [121kB]
Get:8 http://security.debian.org lenny/updates/main Sources [34.3kB]
Fetched 9955kB in 19s (512kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
  apt apt-utils base-files libgnutls26 libpam-modules libpam-runtime libpam0g
  libssl0.9.8
8 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 3722kB of archives.
After this operation, 8192B of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.jp.debian.org lenny/main base-files 5lenny2 [60.4kB]
Get:2 http://ftp.jp.debian.org lenny/main libpam-modules 1.0.1-5+lenny1 [288kB]
Get:3 http://ftp.jp.debian.org lenny/main libpam-runtime 1.0.1-5+lenny1 [165kB]
Get:4 http://ftp.jp.debian.org lenny/main libpam0g 1.0.1-5+lenny1 [103kB]
Get:5 http://ftp.jp.debian.org lenny/main libgnutls26 2.4.2-6+lenny1 [452kB]
Get:6 http://security.debian.org lenny/updates/main apt 0.7.20.2+lenny1 [1618kB]
Get:7 http://security.debian.org lenny/updates/main apt-utils 0.7.20.2+lenny1 [184kB]
Get:8 http://security.debian.org lenny/updates/main libssl0.9.8 0.9.8g-15+lenny1 [850kB]
Fetched 3722kB in 6s (601kB/s)
Preconfiguring packages ...
(Reading database ... 8591 files and directories currently installed.)
Preparing to replace base-files 5 (using .../base-files_5lenny2_armel.deb) ...
Unpacking replacement base-files ...
Processing triggers for man-db ...
Setting up base-files (5lenny2) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 8591 files and directories currently installed.)
Preparing to replace libpam-modules 1.0.1-5 (using .../libpam-modules_1.0.1-5+lenny1_armel.deb) ...
Unpacking replacement libpam-modules ...
Processing triggers for man-db ...
Setting up libpam-modules (1.0.1-5+lenny1) ...
(Reading database ... 8591 files and directories currently installed.)
Preparing to replace apt 0.7.20.2 (using .../apt_0.7.20.2+lenny1_armel.deb) ...
Unpacking replacement apt ...
Processing triggers for man-db ...
Setting up apt (0.7.20.2+lenny1) ...
Installing new version of config file /etc/cron.daily/apt ...
gpg: key 6070D3A1: "Debian Archive Automatic Signing Key (4.0/etch) " not changed
gpg: key ADB11277: "Etch Stable Release Key " not changed
gpg: key BBE55AB3: "Debian-Volatile Archive Automatic Signing Key (4.0/etch)" not changed
gpg: key F42584E6: "Lenny Stable Release Key " not changed
gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed
gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
gpg: Total number processed: 6
gpg:              unchanged: 6
(Reading database ... 8591 files and directories currently installed.)
Preparing to replace libpam-runtime 1.0.1-5 (using .../libpam-runtime_1.0.1-5+lenny1_all.deb) ...
Unpacking replacement libpam-runtime ...
Processing triggers for man-db ...
Setting up libpam-runtime (1.0.1-5+lenny1) ...
(Reading database ... 8591 files and directories currently installed.)
Preparing to replace libpam0g 1.0.1-5 (using .../libpam0g_1.0.1-5+lenny1_armel.deb) ...
Unpacking replacement libpam0g ...
Setting up libpam0g (1.0.1-5+lenny1) ...
(Reading database ... 8591 files and directories currently installed.)
Preparing to replace apt-utils 0.7.20.2 (using .../apt-utils_0.7.20.2+lenny1_armel.deb) ...
Unpacking replacement apt-utils ...
Preparing to replace libgnutls26 2.4.2-6 (using .../libgnutls26_2.4.2-6+lenny1_armel.deb) ...
Unpacking replacement libgnutls26 ...
Preparing to replace libssl0.9.8 0.9.8g-15 (using .../libssl0.9.8_0.9.8g-15+lenny1_armel.deb) ...
Unpacking replacement libssl0.9.8 ...
Processing triggers for man-db ...
Setting up apt-utils (0.7.20.2+lenny1) ...
Setting up libgnutls26 (2.4.2-6+lenny1) ...
Setting up libssl0.9.8 (0.9.8g-15+lenny1) ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libcap1 libedit2 perl perl-modules
Suggested packages:
  ntp-doc perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl
The following NEW packages will be installed:
  libcap1 libedit2 ntp perl perl-modules
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 8257kB of archives.
After this operation, 29.2MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.jp.debian.org lenny/main libedit2 2.11~20080614-1 [64.5kB]
Get:2 http://ftp.jp.debian.org lenny/main perl-modules 5.10.0-19 [3189kB]
Get:3 http://ftp.jp.debian.org lenny/main perl 5.10.0-19 [4535kB]
Get:4 http://ftp.jp.debian.org lenny/main libcap1 1:1.10-14 [9074B]
Get:5 http://ftp.jp.debian.org lenny/main ntp 1:4.2.4p4+dfsg-8 [459kB]
Fetched 8257kB in 2s (2858kB/s)
Selecting previously deselected package libedit2.
(Reading database ... 8591 files and directories currently installed.)
Unpacking libedit2 (from .../libedit2_2.11~20080614-1_armel.deb) ...
Selecting previously deselected package perl-modules.
Unpacking perl-modules (from .../perl-modules_5.10.0-19_all.deb) ...
Selecting previously deselected package perl.
Unpacking perl (from .../perl_5.10.0-19_armel.deb) ...
Selecting previously deselected package libcap1.
Unpacking libcap1 (from .../libcap1_1%3a1.10-14_armel.deb) ...
Selecting previously deselected package ntp.
Unpacking ntp (from .../ntp_1%3a4.2.4p4+dfsg-8_armel.deb) ...
Processing triggers for man-db ...
Setting up libedit2 (2.11~20080614-1) ...
Setting up libcap1 (1:1.10-14) ...
Setting up ntp (1:4.2.4p4+dfsg-8) ...
Starting NTP server: ntpd.
Setting up perl-modules (5.10.0-19) ...
Setting up perl (5.10.0-19) ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libcups2 libkeyutils1 libkrb53 libldap-2.4-2 libtalloc1 libwbclient0
  samba-common ucf
Suggested packages:
  cups-common krb5-doc krb5-user smbldap-tools ldb-tools
The following NEW packages will be installed:
  libcups2 libkeyutils1 libkrb53 libldap-2.4-2 libtalloc1 libwbclient0 samba
  samba-common ucf
0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded.
Need to get 8612kB of archives.
After this operation, 23.0MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.jp.debian.org lenny/main libkeyutils1 1.2-9 [5228B]
Get:2 http://ftp.jp.debian.org lenny/main libldap-2.4-2 2.4.11-1 [179kB]
Get:3 http://ftp.jp.debian.org lenny/main ucf 3.0016 [64.4kB]
Get:4 http://ftp.jp.debian.org lenny/main libtalloc1 1.2.0~git20080616-1 [13.3kB]
Get:5 http://ftp.jp.debian.org lenny/main libwbclient0 2:3.2.5-4lenny2 [78.3kB]
Get:6 http://ftp.jp.debian.org lenny/main samba-common 2:3.2.5-4lenny2 [3372kB]
Get:7 http://security.debian.org lenny/updates/main libkrb53 1.6.dfsg.4~beta1-5lenny1 [449kB]
Get:8 http://ftp.jp.debian.org lenny/main samba 2:3.2.5-4lenny2 [4294kB]
Get:9 http://security.debian.org lenny/updates/main libcups2 1.3.8-1lenny5 [157kB]
Fetched 8612kB in 2s (2878kB/s)
Preconfiguring packages ...

Package configuration





   lqqqqqqqqqqqqqqqqqqqqqqqqqqqqu Samba Server tqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
   x Please specify the workgroup you want this server to appear to be in   x
   x when queried by clients. Note that this parameter also controls the    x
   x domain name used with the security=domain setting.                     x
   x                                                                        x
   x Workgroup/Domain Name:                                                 x
   x                                                                        x
   x YAMASITA______________________________________________________________ x
   x                                                                        x
   x                                                                    x
   x                                                                        x
   mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj


































Package configuration



 lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu Samba Server tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
 x                                                                           x
 x If your computer gets IP address information from a DHCP server on the    x
 x network, the DHCP server may also provide information about WINS servers  x
 x ("NetBIOS name servers") present on the network.  This requires a change  x
 x to your smb.conf file so that DHCP-provided WINS settings will            x
 x automatically be read from /etc/samba/dhcp.conf.                          x
 x                                                                           x
 x The dhcp3-client package must be installed to take advantage of this      x
 x feature.                                                                  x
 x                                                                           x
 x Modify smb.conf to use WINS settings from DHCP?                           x
 x                                                                           x
 x                                                                  x
 x                                                                           x
 mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj



Selecting previously deselected package libkeyutils1.
(Reading database ... 9843 files and directories currently installed.)
Unpacking libkeyutils1 (from .../libkeyutils1_1.2-9_armel.deb) ...
Selecting previously deselected package libkrb53.
Unpacking libkrb53 (from .../libkrb53_1.6.dfsg.4~beta1-5lenny1_armel.deb) ...
Selecting previously deselected package libldap-2.4-2.
Unpacking libldap-2.4-2 (from .../libldap-2.4-2_2.4.11-1_armel.deb) ...
Selecting previously deselected package ucf.
Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ...
Moving old data out of the way
Selecting previously deselected package libcups2.
Unpacking libcups2 (from .../libcups2_1.3.8-1lenny5_armel.deb) ...
Selecting previously deselected package libtalloc1.
Unpacking libtalloc1 (from .../libtalloc1_1.2.0~git20080616-1_armel.deb) ...
Selecting previously deselected package libwbclient0.
Unpacking libwbclient0 (from .../libwbclient0_2%3a3.2.5-4lenny2_armel.deb) ...
Selecting previously deselected package samba-common.
Unpacking samba-common (from .../samba-common_2%3a3.2.5-4lenny2_armel.deb) ...
Selecting previously deselected package samba.
Unpacking samba (from .../samba_2%3a3.2.5-4lenny2_armel.deb) ...
Processing triggers for man-db ...
Setting up libkeyutils1 (1.2-9) ...
Setting up libkrb53 (1.6.dfsg.4~beta1-5lenny1) ...
Setting up libldap-2.4-2 (2.4.11-1) ...
Setting up ucf (3.0016) ...
Setting up libcups2 (1.3.8-1lenny5) ...
Setting up libtalloc1 (1.2.0~git20080616-1) ...
Setting up libwbclient0 (2:3.2.5-4lenny2) ...
Setting up samba-common (2:3.2.5-4lenny2) ...

Creating config file /etc/samba/smb.conf with new version
Setting up samba (2:3.2.5-4lenny2) ...
Generating /etc/default/samba...
tdbsam_open: Converting version 0 database to version 3.
account_policy_get: tdb_fetch_uint32 failed for field 1 (min password length), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 2 (password history), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 3 (user must logon to change password), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 6 (lockout duration), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 7 (reset count minutes), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 8 (bad lockout attempt), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 9 (disconnect time), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 10 (refuse machine password change), returning 0
Importing account for root...ok
Importing account for daemon...ok
Importing account for bin...ok
Importing account for sys...ok
Importing account for sync...ok
Importing account for games...ok
Importing account for man...ok
Importing account for lp...ok
Importing account for mail...ok
Importing account for news...ok
Importing account for uucp...ok
Importing account for proxy...ok
Importing account for www-data...ok
Importing account for backup...ok
Importing account for list...ok
Importing account for irc...ok
Importing account for gnats...ok
Importing account for nobody...ok
Importing account for libuuid...ok
Importing account for guest...ok
Importing account for telnetd...ok
Importing account for yasunari...ok
Importing account for ntp...ok
Adding group `sambashare' (GID 105) ...
Done.
Starting Samba daemons: nmbd smbd.
Reloading /etc/samba/smb.conf: smbd only.
smbpasswd -a yasunari
New SMB password:
Retype new SMB password:
qube:/mnt/disk1/share/hackkit#

特に問題なさそう。