LS-XHL, LS-QL 対応ハックキットの確認（６）LS-XHL：準備

LS-XHL, LS-QL に対応したハックキットを作り直したので、今度こそ全機種で確認していく。

実は、このページをコピペして第三世代 LinkStation ハックキットのページを作ろうとたくらんでいる。

標準ファームに root でログインできるようにする

telnetd を起動して、標準ファームに root でログインできるようにします。

標準ファームで起動

ハックキットのファイルを置く

ファイル共有機能を用いて、エクスプローラから \\LinkStation 名\share に hackkit フォルダを作成し、そこに
・hackkit_YYMMDD.tar.gz
・hackkit_YYMMDD.sh
・mkimage
を置きます。

このフォルダは、Linux 的には /mnt/disk1/share/hackkit となります。

時計を合わせる

root@LS-XHLA1F:~# date
Sat Feb 28 13:14:34 JST 2009
root@LS-XHLA1F:~# date 022813512009
Sat Feb 28 13:51:00 JST 2009
root@LS-XHLA1F:~#

インストールする HDD の準備

root@LS-XHLA1F:~# tail -f /var/log/messages
	:
	:
Feb 28 13:52:19 LS-XHLA1F kernel: usb 1-1: new high speed USB device using ehci_marvell and address 2
Feb 28 13:52:19 LS-XHLA1F kernel: usb 1-1: configuration #1 chosen from 1 choice
Feb 28 13:52:19 LS-XHLA1F kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Feb 28 13:52:24 LS-XHLA1F kernel: scsi 2:0:0:0: Direct-Access     Hitachi    GEC534RF37924E A5CA PQ: 0 ANSI: 2 CCS
Feb 28 13:52:24 LS-XHLA1F kernel: sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Feb 28 13:52:24 LS-XHLA1F kernel: sd 2:0:0:0: [sdb] Write Protect is off
Feb 28 13:52:24 LS-XHLA1F kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb 28 13:52:24 LS-XHLA1F kernel: sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Feb 28 13:52:24 LS-XHLA1F kernel: sd 2:0:0:0: [sdb] Write Protect is off
Feb 28 13:52:24 LS-XHLA1F kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb 28 13:52:24 LS-XHLA1F kernel:  sdb: sdb1 sdb2 sdb3 sdb4
Feb 28 13:52:24 LS-XHLA1F kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
Feb 28 13:52:24 LS-XHLA1F kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0
Feb 28 13:52:25 LS-XHLA1F kernel: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Feb 28 13:52:26 LS-XHLA1F getty[13638]: can't open 'ttyS0': No such device or address^M
Feb 28 13:52:26 LS-XHLA1F kernel: kjournald starting.  Commit interval 5 seconds
Feb 28 13:52:26 LS-XHLA1F kernel: EXT3-fs warning: checktime reached, running e2fsck is recommended
Feb 28 13:52:26 LS-XHLA1F kernel: EXT3 FS on sdb1, internal journal
Feb 28 13:52:26 LS-XHLA1F kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 28 13:52:29 LS-XHLA1F nmbd[1204]: [2009/02/28 13:52:29, 0] nmbd/nmbd.c:terminate(58)
Feb 28 13:52:29 LS-XHLA1F nmbd[1204]:   Got SIGTERM: going down...
Feb 28 13:52:43 LS-XHLA1F mt-daapd[14734]: Starting rendezvous daemon
Feb 28 13:52:43 LS-XHLA1F mt-daapd[14736]: Starting signal handler
Feb 28 13:52:44 LS-XHLA1F mt-daapd[14736]: Loading playlists
Feb 28 13:52:44 LS-XHLA1F mt-daapd[14736]: Initializing database
Feb 28 13:52:44 LS-XHLA1F mt-daapd[14736]: Starting mp3 scan
Feb 28 13:52:44 LS-XHLA1F mt-daapd[14736]: Starting web server from /usr/local/share/mt-daapd/admin-root on port 3689
Feb 28 13:52:44 LS-XHLA1F mt-daapd[14736]: Registering rendezvous names
Feb 28 13:52:44 LS-XHLA1F mt-daapd[14736]: Scanned 0 songs in  1 seconds

root@LS-XHLA1F:~# df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/sda2              4989760    335688   4654072   7% /
/dev/ram1                15360       128     15232   1% /mnt/ram
/dev/sda1               992036    135632    856404  14% /boot
/dev/disk1_6         149217988    131312 149086676   0% /mnt/disk1
/dev/usbdisk1_1         992036     27972    914068   3% /mnt/usbdisk1
root@LS-XHLA1F:~# umount /mnt/usbdisk1/
root@LS-XHLA1F:~# df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/sda2              4989760    335668   4654092   7% /
/dev/ram1                15360       128     15232   1% /mnt/ram
/dev/sda1               992036    135632    856404  14% /boot
/dev/disk1_6         149217988    131312 149086676   0% /mnt/disk1
root@LS-XHLA1F:~#

root@LS-XHLA1F:~# parted -s /dev/sdb print
Model: Hitachi  GEC534RF37924E (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name     Flags
 1      17.4kB  1024MB  1024MB  ext3         primary
 2      1024MB  6144MB  5120MB  xfs          primary
 3      6144MB  7168MB  1024MB  linux-swap   primary
 4      7168MB  500GB   493GB   xfs          primary

root@LS-XHLA1F:~#

root@LS-XHLA1F:~# parted -s /dev/sdb rm 4
root@LS-XHLA1F:~# parted -s /dev/sdb rm 3
root@LS-XHLA1F:~# parted -s /dev/sdb rm 2
root@LS-XHLA1F:~# parted -s /dev/sdb rm 1
root@LS-XHLA1F:~# parted -s /dev/sdb print
Model: Hitachi  GEC534RF37924E (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start  End  Size  File system  Name  Flags

root@LS-XHLA1F:~#

root@LS-XHLA1F:~# fdisk /dev/sdb

The number of cylinders for this disk is set to 60801.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/sdb1               1       60802   488386583+ ee EFI GPT

Command (m for help): d
Selected partition 1

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table
root@LS-XHLA1F:~#

root@LS-XHLA1F:~# parted -s /dev/sdb mklabel gpt
root@LS-XHLA1F:~#

パーティション	タイプ	サイズ	システム
sdb1	プライマリ	1GB 程度	Linux
sdb2	プライマリ	5GB 程度	Linux
sdb3	プライマリ	1GB 程度	Linux swap
sdb4	プライマリ	残り全部	Linux

ot@LS-XHLA1F:~# parted -s /dev/sdb mkpart primary ext3 0 1024M
root@LS-XHLA1F:~# parted -s /dev/sdb print
Model: Hitachi  GEC534RF37924E (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name     Flags
 1      17.4kB  1024MB  1024MB  ext3         primary

root@LS-XHLA1F:~#

root@LS-XHLA1F:~# parted -s /dev/sdb mkpart primary xfs 1024MB 6144MB
root@LS-XHLA1F:~#

root@LS-XHLA1F:~# parted -s /dev/sdb mkpart primary linux-swap 6144MB  7168MB
root@LS-XHLA1F:~#

root@LS-XHLA1F:~# parted -s /dev/sdb mkpart primary xfs 7168MB 500GB
root@LS-XHLA1F:~# parted -s /dev/sdb print
Model: Hitachi  GEC534RF37924E (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name     Flags
 1      17.4kB  1024MB  1024MB  ext3         primary
 2      1024MB  6144MB  5120MB  xfs          primary
 3      6144MB  7168MB  1024MB  linux-swap   primary
 4      7168MB  500GB   493GB   xfs          primary

root@LS-XHLA1F:~#

LS-XHL

バッファローダイレクト
楽天市場
amazon
Sofmap
ValuMore

←
telnet 可能化

ハックの記録
LinkStation／玄箱をハックしよう

→
LS-XHL, LS-QL 対応ハックキットの確認（６）LS-XHL：インストール～